Browse all practice questions for the Navy Aviation Structural Mechanic (AM) Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Navy Aviation Structural Mechanic (AM) Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which of the following is NOT a method of forming?
  • What type of reinforcement is used to close one area from another in aircraft structure?
  • Which precaution is important when using shears?
  • Which two sizes of drill bits are commonly used for stop drilling?
  • How can dividers be utilized in metalworking tasks?
  • Measurements in metal layout are made from which of the following?
  • What type of file would you use to enlarge round holes?
  • During which flight condition would the wing's spar predominantly experience bending loads?
  • What method is typically used for repairing a shallow scratch on an aircraft surface?
  • What does an exploded view in orthographic drawings illustrate?
  • What are the parts of a jo-bolt?
  • What is the purpose of the collar on a hi-shear rivet?
  • What is the definition of a schematic diagram?
  • Which structural member of the wing is responsible for absorbing bending loads during flight?
  • What is the method used to prevent a crack from spreading?
  • What is the function of a file in metalworking?
  • What does the grade of a file indicate?
  • What is the primary purpose of cutting sheet material?
  • What does the term 'cutting edge' of a drill bit refer to?
  • How can the work table on a drill press be adjusted?
  • Which flight control manages the pitching motion of an aircraft along the lateral axis?
  • What flight control is used to control the yawing motion of an aircraft along the vertical axis?
  • Which of the following is NOT a type of permanent fastener?
  • What do the designations 2XXX through 8XXX in the non-ferrous metal group typically indicate?
  • What is meant by 'rivet pitch'?
  • What are lightening holes primarily designed to do?
  • What role does a reference edge serve when laying out metal?
  • What is a defining feature of hi-shear rivets compared to standard rivets?
  • What purpose does a hand drill serve?
  • What does a flush patch typically consist of?
  • Which components make up a Hi-Lok fastener?
  • What are pilot holes primarily used for?
  • What is an advantage of using aluminum alloys?
  • What is the first step after cleaning the metal for a flat pattern layout?
  • What is the main purpose of a drill press?
  • What type of cut is NOT typically made with tinner snips?
  • What edge distance guidelines apply to raised head rivets?
  • Which component of the tail group provides "yawing" direction on a fixed wing aircraft?
  • Which component is NOT part of a cornice brake?
  • When would an arbor press be primarily used?
  • What are the most widely recognized shapes of vertical rings used in aircraft construction?
  • What is the function of the threaded portion of a jo-bolt?
  • What type of rivet gun is specifically designed for high-speed applications?
  • Which machine is designed for both flat sheet metal and cylindrical work?
  • What is the purpose of the bend line in metal layout?
  • What is the function of a center punch?
  • Where is the side view typically located in relation to the frontal view in an orthographic drawing?
  • What are tinner snips primarily used for?
  • What is a common use for a round file?
  • What does the 'number' sizing for twist drills range from?
  • What defines a ferrous metal?
  • How many types of cleco fasteners are commonly recognized based on size and color?
  • What is the primary purpose of an auxiliary view in orthographic drawings?
  • Which element is essential for providing support and maintaining the integrity of a helicopter's main rotor blades?
  • In what situation would a raised head rivet be most suitable?
  • What type of area does a closed skin represent in structural repairs?
  • What is the maximum thickness of material that can be cut using tinner snips?
  • What characteristic defines a flush head jo-bolt?
  • How is the bend radius measured?
  • What components make up a combination square?
  • Which material is commonly used for the collar of a hi-shear rivet?
  • What is the purpose of drill clearance?
  • What does the strength-to-weight ratio of a material indicate?
  • What is the result of placing rivets too far from the edge of the sheet?
  • What is the primary disadvantage of ferrous metals?
  • What is the purpose of an oversize twist drill?
  • Which type of rivet gun is designed for corners and tight spaces?
  • Which of the following is a potential risk of wearing jewelry while operating machinery?
  • Which factor is most critical in determining the strength of a repair?
  • What are the three head styles of a jo-bolt?
  • What does the term "stop drilling" refer to in aviation repair?
  • Which of the following is considered a disadvantage of aluminum alloys?
  • What is the appropriate height of a solid shank rivet bucktail as a function of its diameter?
  • Where are stringers typically placed to enhance fuselage strength?
  • What does the bend tangent line indicate?
  • Which of the following best describes the purpose of a file?
  • What are the three main purposes of sealing a repair?
  • What is a pneumatic drill primarily used for?
  • Which component of a jo-bolt provides resistance to corrosion?
  • In the context of aircraft structure, what type of bolt is known for its swaged collar?
  • How should a burr be removed from a hole?
  • Which file shape is ideal for creating internal angles and corners?
  • What are the head styles of hi-shear rivets?
  • What does the term "permanent part of the aircraft structure" imply about a jo-bolt?
  • What are the advantages of titanium and titanium alloys?
  • What is defined as the flat portion of a formed part not included in a bend?
  • What is a sliproll former used for?
  • Where can inspection and removal procedures for a Jo-bolt be found?
  • What is the size range for twist drills measured in inches?
  • What are the two main types of aircraft wings?
  • In rivet terminology, what does 'edge distance' refer to?
  • What is the primary use of a prick punch?
  • Why should unnecessary personnel be kept clear of forming equipment?
  • What is the purpose of stakes and stake plates in metal forming?
  • What is the primary chord-wise member of an aircraft wing that helps in maintaining its structure?
  • What does a riveted joint layout typically include?
  • What is a potential risk of an improper rivet joint layout?
  • What is the primary function of flanging dies?
  • What type of break line is typically thick and freehand zigzag?
  • What provides the necessary directional control for a rotary wing aircraft?
  • In aircraft repair, what might be the consequence of not securely clamping work into machinery?
  • What is the function of an extension line in an orthographic drawing?
  • What is the distance from the bend tangent line to the mold point called?
  • Which of the following fastener types is commonly used in aviation for weight considerations?
  • What are the minimum and maximum edge distances for a countersunk rivet?
  • What are the two types of twist drill bits commonly used?
  • What is the main purpose of landing gear in an aircraft?
  • What does the thickness of the material determine when selecting rivets?
  • Which of the following cleco fasteners is black in color?
  • Which of the following are classes of monocoque fuselage construction?
  • What is the primary purpose of a permanent fastener?
  • Which characteristic can be attributed to aluminum alloys as an advantage?
  • What is the primary function of an aircraft fuselage?
  • What is the purpose of using a bucking bar during riveting?
  • What is the main purpose of a box and pan brake?
  • Which of the following is NOT a precaution when using forming equipment?
  • What is the primary function of a cleco fastener?
  • Which part of a drill bit is inserted into the drill chuck?
  • What does the second number in an aluminum alloy designation code signify?
  • How is stress intensity defined in relation to repair strength?
  • When laying out metal, what is a reference line used for?
  • What is the primary role of a rivet set?
  • Which machine is best suited for forming small hems, flanges, and seams up to 1 inch?
  • After installation, what is a jo-bolt considered to be?
  • What is meant by open skin in aviation terminology?
  • What function does a squaring shear serve?
  • What is the role of aircraft stations?
  • What is the size range for letter-sized drill bits?
  • On which side of the rivet should the bucking bar generally be placed?
  • What is the primary purpose of using a scribe in metalwork?
  • What is the primary objective of ensuring safety guards are in place while operating machinery?
  • What is a throatless shear used for?
  • What is a key characteristic of a flush patch?
  • What is NOT a step in the removal procedures for blind rivets?
  • What construction feature does a centerline provide in engineering drawings?
  • Which of the following best describes the characteristics of hardness in materials?
  • What is the main advantage of using permanent fasteners in assembly?
  • What term is used to describe metals with iron as a principal element?
  • What is a key characteristic of lightening holes?
  • What precautions should be observed when handling sealants?
  • Which of the following is NOT a variable to consider when selecting solid shank rivets?
  • What are the three ways to size twist drills?
  • Why is the drill press preferred for sensitive drilling tasks?
  • How is a cut line typically represented on a layout?
  • What can happen if rivets are improperly spaced too close to the edge?
  • What type of wing structure allows for greater internal space and less external bracing?
  • What are relief holes used for in metalworking?
  • What does the designation 1XXX indicate in the non-ferrous metal group?
  • What is the significance of a good rivet layout?
  • What utility does a flat pattern layout serve in sheet metal work?
  • What is the first view that is typically drawn in an orthographic drawing?
  • How are hacksaw blades primarily identified?
  • What is the primary concern when determining edge distances for rivets?
  • What component provides the basic shape of the fuselage?
  • What is the proper use of a center punch?
  • In terms of applications, what is a common use for titanium alloys?
  • Which of the following are the two types of blind rivets?
  • What is the purpose of a turret punch?
  • What defines a 'solid shank rivet'?
  • What is the drill clearance angle from the leading edge to the trailing edge?
  • Where would a countersunk rivet typically be utilized?
  • For what reason would a metalworker use aviation snips?
  • What is one method to relieve stress on metal during processing?
  • What flight control is responsible for the rolling motion of an aircraft along the longitudinal axis?
  • What kind of metal work is a sliproll former primarily used for?
  • What is a significant concern regarding sealants used in repairs?
  • How are jo-bolts sized?
  • What is one characteristic of a hand drill?
  • Which type of line is characterized by alternating long and short dashes?
  • Which shape of file is most suitable for finishing bottom slots?
  • Which of the following is not a precaution to take when using layout tools?
  • Which of the following tools is NOT used to cut metal?
  • What characteristic does a sectional view depict in an orthographic drawing?
  • What are the parts of a hi-shear rivet?
  • What is the purpose of a bending leaf in a cornice brake?
  • What outcome should be achieved when a rivet squeezer is set up correctly?
  • Why is a 'clad' coating sometimes applied to aluminum?
  • In an orthographic drawing, what do phantom views illustrate?
  • What is the main feature of a box and pan brake?
  • When selecting a file for a job, what factors should be considered?
  • What component holds the twist drill in place on a pneumatic drill?
  • What is the visual characteristic of a hidden line in engineering drawings?
  • What is the definition of closed skin in aviation repair?
  • What is the primary function of forming in metalworking?
  • What are the two types of drill presses?
  • How is the proper length of a hi-shear rivet determined?
  • What is indicated by the term 'drill angle'?
  • For which size cleco fastener is green the corresponding color?
  • Which machine is used to shape the edge of metal into various designed shapes?
  • What type of protection must be worn when drilling?
  • What is the main purpose of drilling in aircraft repairs?
  • What is the maximum material thickness that aviation snips can cut?
  • What is one purpose of forming sheet metal?
  • Which material is known for its good corrosion resistance and moderate strength?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy